Motion Casts
Recording

How to Record Your Mic and System Audio on Separate Tracks

Why recording your microphone and computer sound on separate tracks makes editing easier, and how to balance, mute or clean each one before you export.

Updated 5 minute read The Motion Casts team

To record your mic and system audio separately, use a screen recorder that captures each source on its own audio track: one track for your microphone and one for the sound coming from your PC, such as app sounds, music or the other people on a call. Turn on both sources, confirm that the recorder lists them as separate tracks, and record. In the editor you can then turn each one up or down, mute a notification, or clean up your voice without touching the rest. The built-in Windows tools mix everything into a single track, so you need a recorder that supports separate tracks.

It is a small setting that saves a lot of editing pain. This guide explains why separate tracks matter, how to set them up, and what to do with them when you export.

Why separate tracks are worth it

With a single mixed track, your voice and the computer's sound are baked together. Once that happens, they cannot be cleanly pulled apart again. Separate tracks let you:

  • Balance the mix. Turn down a loud demo video or game without making your narration quieter.
  • Remove distractions. Mute a notification ding, an email alert or a sound that played at the wrong moment, while your voice continues.
  • Clean up your voice. Apply noise reduction to the microphone only, so it does not affect music or app sounds.
  • Fix sync. If one source is delayed, shift it on its own.
  • Re-use the audio. Export just your narration as MP3 or WAV for a podcast, or just the system audio for a sound check.

Mixed vs separate tracks at a glance

Task in editingOne mixed trackSeparate tracks
Lower background musicLowers your voice tooTurn down the system track only
Remove a notification soundCuts your words with itMute that moment on the system track
Noise reduction on voiceAlso affects app audioApplied to the mic only
Fix a mic delayNot possibleShift the mic track
Silence removalMusic can hide the pausesPauses are detected cleanly on your voice

What about the built-in Windows tools?

Snipping Tool on Windows 11 and Xbox Game Bar can both record your microphone and the computer's sound, but they save them together in one file with a single audio track. That is fine for a quick clip you will share as it is. If you plan to edit, balance or clean up the audio, it is worth using a recorder that keeps the sources apart. Our guide to screen recording on Windows 11 with audio covers the built-in options in detail.

How to set it up

  1. Pick your microphone. In Settings > System > Sound, check that the right mic is selected under Input and speak to see the level move.
  2. Pick your output device. System audio is captured from the device you are listening on, so choose the headphones or speakers you will use while recording under Output.
  3. Turn on both sources in your recorder. Enable the microphone and system audio (sometimes called desktop audio or computer sound).
  4. Check that they are separate. Look for an option such as separate tracks or multi-track audio, or check that the editor shows two audio lanes after a test recording.
  5. Set levels. Aim for a strong mic level that does not hit the top of the meter. Set app and music volume to a comfortable listening level.
  6. Record a short test and play back each track on its own.

Motion Casts records the microphone and system sound on separate tracks, with noise reduction built in, so they are ready to balance in the timeline editor as soon as you stop recording.

Wear headphones when recording system audio and a microphone together. With speakers, your mic picks up the computer's sound as well, so the system audio ends up on both tracks and the benefit is lost.

Editing with two tracks

Once both tracks are on the timeline, a few simple moves cover most videos:

  • Set the voice level first. Your narration is the most important sound. Get it clear and consistent.
  • Bring system audio in under it. For tutorials, app sounds usually work best quietly in the background. For a video or game demo, raise them during moments with no narration.
  • Mute the unwanted moments. Cut or silence notification sounds and accidental audio on the system track.
  • Remove pauses from the voice. Silence detection works better on a clean voice track. See removing silence from a video automatically.
  • Clean up the mic gently. Light noise reduction on the mic track removes fan hum and hiss without touching app sounds.

Exporting: one track or several?

Separate tracks are for editing. Most of the places you publish expect a single audio track, so the usual approach is to mix the tracks down when you export.

DestinationAudio to export
YouTube, social media, email, chatOne mixed track in an MP4
Archive or later re-editingKeep the project, or use MKV or MOV, which can hold several audio tracks
Podcast or audio-only versionThe mic track as MP3 or WAV

Motion Casts saves MP4, MOV, MKV, WebM, AVI and GIF, plus MP3 or WAV audio, so you can export the mixed video for upload and a separate audio file of your narration from the same project.

Recording online meetings

Separate tracks are especially useful for calls and webinars. The other participants come through system audio, and you come through the microphone. If someone else's line is noisy, you can lower it without making yourself quieter. Always tell participants you are recording, and follow your organization's rules and local law. Our guide to recording an online meeting on Windows covers the setup.

Common problems

The system audio track is silent

The recorder is capturing a different output device from the one playing sound. Make sure the output device in Windows matches the one selected in the recorder, then test again.

My voice appears on both tracks

You are using speakers, or the microphone is set to be heard through the output ("listen to this device"). Use headphones and turn off monitoring in the microphone's properties.

The uploaded video has no sound

Some platforms only play the first audio track of a multi-track file. Export with a single mixed track for uploads.

Frequently asked questions

Why record audio on separate tracks?

So you can turn system sounds down without lowering your voice, remove a notification ding, or clean up mic noise without affecting the rest.

Can I split a mixed audio track afterwards?

Not cleanly. Once the mic and system sound are mixed together they cannot be fully separated, so set up separate tracks before you record.

Which formats keep separate audio tracks?

MKV and MOV can hold several audio tracks. Most platforms expect a single mixed track, so mix the tracks down when you export for upload.

Get three guides like this every month, plus software update notices.Subscribe →