Motion Casts
Editing

How to Trim a Screen Recording on Windows (Start, End and Middle)

How to trim a screen recording on Windows 10 and 11: cut the start, end or a middle section, using built-in apps or a timeline editor. Step by step.

Updated 5 minute read The Motion Casts team

To trim a screen recording on Windows, open it in an editor, move the start and end points to where the useful part begins and ends, and save a new copy. For a quick trim of the start and end, the built-in Photos app on Windows 10 and 11 is enough. To cut a mistake out of the middle, you need a timeline editor: split the clip on either side of the mistake, delete the piece in between, and export.

Almost every recording needs this. The first few seconds show you reaching for the stop-and-start hotkey, the last few show you clicking Stop, and somewhere in the middle there is usually a wrong turn. This guide covers each kind of trim, the built-in way and the faster way.

Three kinds of trim

What you want to removeHow it is doneBuilt-in Photos app?
Dead time at the startMove the start point laterYes
Clicking Stop at the endMove the end point earlierYes
A mistake in the middleSplit twice, delete the middle pieceNo
Many pauses spread through the videoAutomatic silence removal, then reviewNo

Trim the start and end with the Photos app

The Photos app that comes with Windows can trim a video without installing anything. The layout has changed a few times, so the button names may differ slightly on your PC.

  1. Right-click the recording in File Explorer and choose Open with > Photos.
  2. Click the Trim button in the toolbar (on Windows 10, look under Edit and Create > Trim).
  3. Drag the left handle to where the recording should start, and the right handle to where it should end. Press play to check each point.
  4. Click Save as copy. Photos saves a new file and leaves the original alone.

That is all Photos can do: one continuous section from somewhere in the video. It cannot remove a part in the middle and join the rest together.

Keep the original recording until you have watched the trimmed copy through once. If a trim point is a second too early, you can go back and redo it instead of re-recording.

Cut a section out of the middle

For this you need an editor with a timeline. Windows 11 includes the Clipchamp video editor, and any desktop video editor can do it too. The method is the same everywhere:

  1. Open or import the recording and drag it onto the timeline.
  2. Move the playhead to the exact moment the mistake starts. Zoom into the timeline so you can place it precisely.
  3. Use Split (often the S key or a scissors icon) to cut the clip at that point.
  4. Move the playhead to where the mistake ends and split again.
  5. Select the small piece between the two splits and delete it. Close the gap if your editor does not do so automatically.
  6. Play across the join to check that it is clean, then export.

Make the cut invisible

A cut in a screen recording shows as a jump: a menu suddenly open, the cursor in a new place. A few habits hide it:

  • Cut between sentences, not mid-word. Look for a dip in the audio waveform.
  • Cut when the screen is still. If the cursor and windows are in the same place on both sides, viewers will barely notice.
  • Pause instead of stopping. When you make a mistake while recording, pause, put the screen back how it was, and resume. Your recorder's pause hotkey does most of the editing for you.

Trimming in Motion Casts

In Motion Casts, the recording opens on a simple timeline as soon as you stop. You can trim the start and end, cut out middle sections, split a long recording into separate clips, join takes together, and speed up slow parts such as a file copy or an installer.

  1. Stop the recording. It opens in the editor.
  2. Drag the start and end of the clip inward to trim the dead time.
  3. For a mistake in the middle, place the playhead, split, move to the end of the mistake, split again and delete the piece.
  4. For long waits, select the section and change its speed instead of deleting it, so viewers still see what happened.
  5. Export with a platform preset, or with your own settings.

If the problem is lots of small pauses rather than one big mistake, trimming each by hand is slow. Motion Casts can find long silences and filler words and list every cut for you to approve. Our guides to removing silence automatically and removing um and uh from a video walk through that.

Does trimming reduce quality?

It depends on how the editor saves the result.

  • Lossless trimming copies the original video data without decoding it. It is fast and keeps full quality, but it can only cut at keyframes, so the cut point may land a fraction of a second away from where you wanted it.
  • Re-encoding decodes and compresses the video again. It can cut on any frame and lets you change size or format, but each re-encode loses a little detail.

Most editors re-encode on export. With sensible settings the loss is invisible. Export at the same resolution and frame rate as the recording, and use a bitrate at least as high as the original. If you want to understand the codec choice at this point, our H.264 vs H.265 guide explains the trade-offs.

Trim before you do anything else

The order of your edits matters. Trim first, then do everything that depends on timing:

  1. Trim and cut the start, end and mistakes.
  2. Remove pauses and filler words.
  3. Add zooms, text and blur, which are tied to points in the timeline.
  4. Generate captions on the final cut, so the timings match.
  5. Export.

If you caption first and trim later, the caption timings after each cut can drift and you end up fixing them twice.

Common trimming problems

The trimmed file is bigger than the original

The export used a higher bitrate than the recording. That does not improve quality. Lower the bitrate or pick a preset. If you need the file under a specific size, see our guide to compressing a video for email.

The audio clicks or pops at a cut

The cut landed in the middle of a sound. Move the split a few frames into the nearest silence. Some editors also add a very short audio fade at each cut, which hides the click.

The cut point moved after saving

This happens with lossless trimming, which snaps to the nearest keyframe. Re-encode the clip if you need frame-accurate cuts.

I cannot find the Trim option in Photos

Update the Photos app from the Microsoft Store, or right-click the video and choose Open with to make sure Photos, not another player, is opening it. On some versions the option lives under an Edit button.

Quick checklist

  • Keep the original until the trimmed copy is checked.
  • Use Photos for start and end only; use a timeline editor for anything in the middle.
  • Cut on silence and still screens so joins are invisible.
  • Trim before captions, zooms and other timed edits.
  • Export at the original resolution and frame rate.

Frequently asked questions

How do I trim a video in Windows 11 without extra software?

Open the video in the Photos app, choose the trim option, drag the start and end sliders and click Save as copy. It can only trim the start and end, not cut out a section in the middle.

How do I cut out a section from the middle of a video?

Split the clip at the start and end of the section, delete the piece in between, and the two remaining parts join up on the timeline.

Does trimming a video reduce its quality?

Trimming at keyframes can be lossless, but most editors re-encode on export. Exporting at the original resolution and a good bitrate keeps the loss invisible.

Get three guides like this every month, plus software update notices.Subscribe →