Motion Casts
Windows 10 & 11 Buy license · $59.95
Recording

How to Schedule a Screen Recording to Start and Stop on Its Own

Schedule a screen recording on Windows to start and stop on its own for webinars, live events and long tasks. Setup, sleep settings and disk space.

Updated 5 minute read The Motion Casts team

To schedule a screen recording on Windows, you need a screen recorder with a scheduling feature, because the built-in Snipping Tool and Xbox Game Bar cannot start or stop recording on a timer. Set the start time and either an end time or a duration, choose what to record (a monitor, a window, a region or a browser tab) and which audio sources to capture, then make sure your PC will stay awake, signed in and unlocked until the recording finishes. Check free disk space before a long session, and run a short scheduled test first.

Scheduled recording is useful whenever you need to capture something that happens at a set time, such as a webinar, a live stream, an online class or a long-running task, without sitting at the PC to press the button. This guide covers the setup and the Windows settings that most often break it.

When scheduling a recording makes sense

  • Webinars and live events that start while you are in another meeting or away from your desk.
  • Online classes and training sessions you want to review later. Check you are allowed to record them first.
  • Live streams on a platform that does not keep replays.
  • Long processes, such as an installation, a data import or a test run, where you want a record of what happened.
  • Time zone clashes, when an event runs in the middle of your night.

Only record events you have the right to record. Many webinar and meeting platforms tell participants when recording is on, and some content is protected or covered by terms of use. When in doubt, ask the organizer for a replay.

Step 1: Set up the schedule

Motion Casts can schedule recordings to start and stop on their own. The steps in any recorder with a scheduler are broadly the same:

  1. Choose the source. For a webinar in a browser, record the browser tab or the window. For anything else, record the monitor it will appear on.
  2. Choose the audio. Turn on system audio to capture the speakers. Turn off the microphone unless you need it, so room noise is not recorded.
  3. Set the start time a few minutes before the event begins.
  4. Set the end time or duration with a margin, since events often overrun. Trimming extra minutes is easy; missing the end is not fixable.
  5. Choose quality settings that suit the content. A talking-head webinar does not need 4K at 60 fps.
  6. Choose the save folder on a drive with plenty of space.

Step 2: Get the content ready on screen

A scheduled recording captures whatever is on screen at the start time. It cannot join the meeting or open the page for you, so prepare it in advance:

  • Open the webinar link or stream page before you leave, and check it will start playing on its own.
  • Make the player as large as possible, or full screen, on the monitor being recorded.
  • Turn up the player's volume. System audio records what the PC plays.
  • Turn on Do not disturb so notifications do not pop up over the video.
  • Close apps that might show reminders, update prompts or chat messages.

Step 3: Stop Windows from interrupting

Most failed scheduled recordings are caused by Windows going to sleep, locking the screen or restarting for updates.

  1. Open Settings > System > Power and battery > Screen and sleep (Windows 11) and set the sleep and screen-off times to Never while plugged in. On Windows 10, the setting is under Settings > System > Power and sleep.
  2. Plug in your laptop. Do not rely on battery for a long recording.
  3. Open Settings > Windows Update and pause updates or set active hours that cover the recording, so the PC does not restart.
  4. Leave the PC signed in and unlocked. A locked screen may record as black or not at all.
  5. Disable any screen saver.

Remember to change the sleep settings back afterwards if you normally save power.

Step 4: Check disk space

Long recordings use a lot of space. Rough figures for H.264 recordings:

RecordingBitratePer hour (approx.)
720p, 30 fps4 Mbps1.8 GB
1080p, 30 fps8 Mbps3.6 GB
1080p, 60 fps12 Mbps5.4 GB
4K, 30 fps40 Mbps18 GB

The math is simple: megabits per second × 3,600 seconds ÷ 8 gives megabytes per hour. Check free space in Settings > System > Storage, and leave a good margin above the estimate.

Step 5: Run a test

Schedule a two-minute recording starting five minutes from now, with the same settings, and walk away from the PC. When it finishes, check that it started on time, captured the right screen, recorded sound and stopped on its own. That one test catches almost every problem.

Name files so you can find them later

If you schedule recordings regularly, such as a weekly class or a recurring team webinar, the files pile up quickly. Use a naming pattern that includes the date and the event, for example team-webinar_2026-10-05.mp4, so you can find the right one months later. Motion Casts can name files automatically with a pattern, and rename whole batches later if you change your system.

After the recording

  • Trim the waiting time at the start and the overrun at the end. Our guide to trimming a screen recording shows how.
  • Add captions so you can search and skim the content. Motion Casts generates captions on your PC and can save them as an SRT file.
  • Shrink the file for sharing with colleagues. See compressing a video for email.

If you are recording a meeting you are taking part in rather than watching, see our guide to recording an online meeting on Windows.

Common problems

The recording never started

The PC was asleep, the recorder was closed, or the schedule was set for the wrong day or time zone. Keep the recorder running and double-check the date.

The recording is black

The screen was locked or turned off, or the player was minimized. Keep the PC unlocked and the player visible.

There is no sound

System audio was not enabled, or the player was muted. Make sure the sound plays through the output device the recorder captures.

Frequently asked questions

Can Windows schedule a screen recording on its own?

Not with the built-in tools. You need a screen recorder with a scheduling option, or you have to start recording manually.

Will a scheduled recording work if my PC is asleep?

Not reliably. Set Windows sleep to Never while the recording is scheduled, in Settings > System > Power and battery.

How much disk space does a long recording need?

It depends on resolution and bitrate. A 1080p recording at 8 Mbps uses about 3.6 GB per hour, so check free space before a long session.

Get three guides like this every month, plus software update notices.Subscribe →