To reduce background noise in a recording, deal with it in two stages. First, cut the noise at the source: move the microphone closer to your mouth, turn off fans and air conditioning, close windows and soften the room. Then apply gentle noise reduction to clean up the steady hum or hiss that remains, ideally on a voice track recorded separately from your system audio. Light noise reduction on good audio sounds natural. Heavy noise reduction on bad audio sounds robotic, so prevention does most of the work.
This guide covers the common types of noise, what to fix before you press record, the Windows settings worth checking, and how to use noise reduction without damaging your voice.
Know what kind of noise you have
Different noises need different fixes. Noise reduction tools are good at some and poor at others.
| Noise | Examples | Best fix |
|---|---|---|
| Steady hum or hiss | PC fans, air conditioning, fridge, electrical hum, mic hiss | Noise reduction handles this well |
| Room echo | Hollow, boomy sound in bare rooms | Soft furnishings and a closer mic; hard to remove later |
| Short, sharp sounds | Keyboard clicks, mouse clicks, desk bumps | Mic placement and a quieter keyboard; cut the worst in editing |
| Changing noise | Traffic, voices, dogs, music next door | Record at a quieter time; noise reduction struggles |
| Computer sounds | Notification dings, alert sounds | Turn on Do not disturb; separate audio tracks |
Step 1: Fix the noise before you record
Every bit of noise you avoid is noise you do not have to remove. These changes cost nothing and make a big difference:
- Move the mic closer. This is the biggest single improvement. Halving the distance makes your voice much louder relative to the room, so you can lower the input level and the background drops with it. A headset mic or a USB mic a hand's width from your mouth works well.
- Point the mic away from noise. Many desk mics pick up mostly from the front. Aim them at you and away from the PC case and keyboard.
- Quiet the room. Turn off fans, air conditioning and heaters while recording. Close windows and doors.
- Soften the room. Curtains, rugs, a sofa or even a duvet behind your screen reduce echo. Bare walls and hard floors make speech sound hollow.
- Quiet your PC. Close heavy apps so fans do not ramp up. Laptops on soft surfaces block airflow and get louder.
- Mute notifications. Turn on Do not disturb from the notification area in Windows 11, or Focus assist in Windows 10.
Record ten seconds of silence in your normal setup and listen with headphones at full volume. Whatever you hear is the noise in every recording. Fix what you can, then test again.
Step 2: Check your Windows microphone settings
- Open Settings > System > Sound and select your microphone under Input.
- Set the Input volume so your normal speaking voice is strong but does not hit the top of the meter. Too high adds hiss and room noise; too low makes the voice thin and forces you to boost it later, which raises the noise too.
- Look for Audio enhancements or Voice clarity. Some PCs offer noise suppression here, depending on the hardware and drivers. Try it on and off and compare test recordings.
- If your mic has its own software or a gain knob, set it there rather than relying on Windows boost.
If you get no sound at all, see our guide to fixing a screen recording with no sound.
Step 3: Record your voice on its own track
Noise reduction works best on a clean voice track. If your microphone and the computer's sound are mixed into one track, any cleanup applied to your voice also affects the app sounds, music or video you are recording, and you cannot lower a notification ding without lowering your voice.
Motion Casts records the microphone and system sound on separate tracks so you can balance them later, with noise reduction built in. Our guide to recording mic and system audio on separate tracks explains the benefits in more detail.
Step 4: Apply noise reduction gently
Noise reduction learns what the background sounds like and lowers it wherever you are not speaking, and to some degree underneath your voice. The trade-off is simple: the stronger the reduction, the more it also removes from your voice.
- Start light. Use a low or medium setting and increase it only if the noise is still distracting.
- Listen on headphones. Laptop speakers hide both noise and the side effects of removing it.
- Watch for warning signs. A watery, metallic or robotic voice, or words with their edges clipped, means the reduction is too strong.
- Accept a little background. A faint, steady room tone sounds natural. Total silence between sentences can sound odd.
Step 5: Tidy up the rest in editing
- Cut the gaps. Removing long pauses also removes the stretches where background noise is most noticeable. Motion Casts can find long silences and filler words and list every cut for you to approve. See removing silence from a video automatically.
- Cut loud one-off sounds. A cough, a dropped pen or a phone buzz can usually be trimmed out if it falls between sentences.
- Lower the system track. If the app or music is competing with your voice, turn the system audio down rather than turning your voice up.
- Keep music quiet. Background music should sit well below speech, or it becomes noise of its own.
Keyboard noise in screen recordings
Typing is the noise screen recorders hear most. It is sharp and loud, and noise reduction does little with it. Some fixes:
- Use a headset or a mic positioned close to your mouth, so the keyboard is relatively quieter.
- Put the mic on a stand or arm rather than on the desk, where it picks up every tap as vibration.
- Type slower and softer during recording, or paste prepared text.
- Narrate after typing rather than while typing, so you can cut or lower the typing sections.
When re-recording is faster
If the noise is louder than your voice, changes constantly, or comes with heavy echo, cleanup rarely gives a good result. For a short narration, re-recording in a quieter setup usually takes less time than fighting it, and sounds better.
Frequently asked questions
What is the best way to reduce background noise?
Prevent it first: move the mic closer to your mouth, turn off fans and close windows. Noise reduction then only has to clean up what is left.
Why does my voice sound robotic after noise reduction?
The reduction is too strong. Use a lighter setting, because removing every trace of noise also eats into your voice.
Does Windows have built-in noise suppression?
Some PCs offer voice clarity or noise suppression options in Settings > System > Sound under the microphone's properties, depending on hardware and drivers.
