Motion Casts
Windows 10 & 11 Buy license · $59.95
Recording

Using a Teleprompter for Recording Videos on Your PC

Use a teleprompter for recording videos on your PC and read your script without looking away. Text placement, scroll speed and keeping it off the video.

Updated 5 minute read The Motion Casts team

A teleprompter for recording videos on a PC is a scrolling script shown on your screen, placed as close to your webcam as possible, so you can read while appearing to look at the viewer. The three things that make it work are placement (just below the camera, in a narrow column), speed (matched to how fast you naturally speak) and, for screen recordings, keeping the script window out of the recording. Get those right and you stop losing your place, cut down on "ums" and retakes, and still look natural on camera.

This guide covers how to set one up on a Windows PC, how to write a script that reads well aloud, and the mistakes that make reading obvious.

Why use a teleprompter at all?

  • Fewer retakes. You know exactly what comes next, so you stumble less.
  • Fewer filler words. Most "ums" happen while you search for the next sentence.
  • Tighter videos. A script keeps you on topic and stops tangents.
  • Consistent messaging. Product demos, training and sales videos often need precise wording.

The trade-off is that reading can sound stiff. The tips below on writing and pacing deal with that.

Where to place the script

When you look at the script instead of the lens, viewers notice your eyes are off to one side. The fix is distance: the closer the text is to the camera, the less your eyes move.

  1. Put the script directly under the webcam, at the top center of your screen if the camera sits on top of the monitor.
  2. Make the window narrow. A column a few words wide means your eyes barely move left and right as you read. Wide lines make your eyes sweep visibly.
  3. Show only a few lines at a time. Three or four lines near the camera are better than a whole page.
  4. Sit a little further back. The further you are from the screen, the smaller your eye movements look on camera.

Laptop users have an advantage here: the webcam is right above the screen, so a narrow script window at the top center is almost in line with the lens.

Keeping the script out of a screen recording

This is where a basic setup falls down. If you are recording your full screen, any script window on that screen ends up in the video. Workarounds include:

  • Record a region or window and keep the script outside it.
  • Use a second monitor for the script, though it is then further from the camera.
  • Use a teleprompter that is hidden from capture.

Motion Casts has a built-in teleprompter for this situation. You paste your script and it scrolls in a small window next to your webcam that never appears in the recording, even when you record the full screen. You can set the scrolling speed, or let it follow your voice, and add script notes for yourself.

Setting the right scrolling speed

Most people speak somewhere around 130 to 160 words per minute when presenting, a little slower than in conversation. If the text moves too fast, you rush and stumble; too slow, and you pause awkwardly waiting for the next line.

  1. Start slower than you think you need.
  2. Do a test read of the first minute without recording.
  3. If you keep catching up to the bottom of the text, slow it down. If your eyes keep drifting to the top, speed it up.
  4. For screen recordings, plan to pause the scroll while you demonstrate something on screen.

A voice-following mode removes most of this tuning: the text moves when you speak and waits when you stop to click through a demo.

How to write a script that sounds natural

Writing for the ear is different from writing for the page. A script that reads well on paper often sounds stiff out loud.

  • Use short sentences. One idea each. Long sentences make you run out of breath or lose the thread.
  • Write how you talk. Use contractions like "you'll" and "it's". Read each line out loud while writing.
  • Mark pauses. Leave a blank line or a note like "(pause)" where you want a beat, or where you will click something on screen.
  • Mark actions. For tutorials, add short stage directions such as "(open Settings)" so you remember to do it at the right moment.
  • Spell out tricky words the way you will say them, such as numbers, acronyms and names.
  • Keep paragraphs short. They give you natural places to breathe and to restart a take.

Script or bullet points?

Full scriptBullet notes
Best forIntros, outros, demos, sales and training videosLong tutorials, casual explainers
DeliveryPrecise but can sound readNatural but more filler words
RetakesFewerMore
Prep timeLongerShorter

Many people mix the two: a full script for the opening and closing, where wording matters most, and bullet points for the hands-on part in the middle.

Rehearsing with the teleprompter

Do one full read-through before recording. Mark any line you stumble over and rewrite it in simpler words. Sentences that look fine on the page often contain a tongue-twister you only notice out loud.

Common teleprompter mistakes

  • Script too far from the camera, so you visibly look away.
  • Lines too wide, so your eyes sweep across the screen.
  • Text too small, so you lean in and squint.
  • Reading without rehearsing. One run-through out loud catches awkward sentences.
  • Monotone delivery. Smile, vary your pace and stress key words as if you were explaining it to a friend.

Putting it together

  1. Write the script in short, spoken sentences, with pause and action notes.
  2. Place a narrow script window just under your webcam.
  3. Set a slow scroll speed, or a mode that follows your voice.
  4. Do a test read, then adjust speed and position.
  5. Record, pausing between sections if you need to.
  6. Trim stumbles and long pauses in the edit.

A teleprompter pairs naturally with a webcam overlay. Our guide to recording your screen and webcam at the same time covers camera placement and lighting, and if you still catch the odd filler word, our guide to removing um and uh from a video explains how to clean them up afterwards. Teachers recording lessons will find more tips in our guide to recording video lessons for students. With Motion Casts, the teleprompter, webcam and editor are all in one app.

Frequently asked questions

Where should a teleprompter go when recording on a PC?

As close to the webcam as possible, usually just below it at the top of the screen. The shorter the distance, the less it looks like you are reading.

What speed should a teleprompter scroll?

Most people speak about 130 to 160 words a minute. Start slower than you think, do a test read and adjust until you never have to wait or chase the text.

Will the teleprompter show up in my screen recording?

With some setups it will, if it is inside the recorded area. Motion Casts shows its teleprompter in a window that never appears in the recording.

Get three guides like this every month, plus software update notices.Subscribe →